CP Seal Height Rod on/off Viton Ball Gaskets are used

Viton Ball Gaskets are used with early Legacy WGC-50/100/250 fillers only and press onto the tip of the Filler Valve

Operating Pressure: 6000 psi

The inlet temperature sensor is used on most WGF canning systems with 3 or more fill heads

Flow control valve

CP Seal Height Rod on/off Viton Ball Gaskets are usedThe CP Seal Height Rod (AKA Tapped Linear Motion Shaft) is used on all Fusion Counter Pressure systems and is used to guide the Fill Head Raise Plate as it moves up and down. All are turned, ground, and polished to tight diameter and straightness tolerances. The surface is hardened, so they stand up to repeated motion while keeping their center soft enough to absorb stress from shifting loads. Chamfered edges remove sharp corners at the end of these